Unit Award Scheme
108699 BICYCLE MAINTENANCE
In successfully completing this unit, the Learner will have | Evidence needed | |
---|---|---|
demonstrated the ability to | ||
1 | service and adjust the preload on bearings, including headsets and cones | Summary sheet |
2 | true mildly buckled wheels | Summary sheet or student completed work |
3 | replace and correctly lube gear and brake cables | Summary sheet or student completed work |
4 | fully set up gears from scratch | Summary sheet or student completed work |
5 | remove a bottom bracket and re-install with correct lubricants to prevent seizing | Summary sheet or student completed work |
6 | check the drivetrain for wear and replace parts as necessary | Summary sheet or student completed work |
7 | Remove and refit headset | Summary sheet or student completed work |
8 | Check the derailleur hanger for straightness | Summary sheet or student completed work |
9 | produce a report showing how to strip down a bike and how to recognise and repair at least four faults on a bicycle | Summary sheet or student completed work |
shown knowledge of | ||
10 | at least three correct lubricants and cleaners and where to use them on a bicycle and the safety related to these | Summary sheet or student completed work |
experienced | ||
11 | working safely in a group to recognise faults and then repair a non working bicycle. | Student completed work |
All outcomes recorded on an AQA Summary Sheet
Approved 2 October 2017Level - Level Two