Unit Award Scheme
108036 RIGHT TRACK PROJECT GO-KART BASIC MECHANICS
In successfully completing this unit, the Learner will have | Evidence needed | |
|---|---|---|
demonstrated the ability to | ||
| 1 | listen and respond to instructions | Summary sheet |
| 2 | follow health and safety procedures when dealing with tools, equipment and heavy machinery in a workshop environment | Summary sheet |
| 3 | select and use appropriate tools for at least three different tasks | Summary sheet |
| 4 | check and adjust the steering using a) rose joints b) track rods | Summary sheet |
| 5 | check and adjust the accelerator cable | Summary sheet |
| 6 | change one front and one rear wheel on a go kart, ie a) remove the wheel using appropriate tools b) remove the tyre from the rim c) fit the new tyre onto the rim and fit to the kart d) check the tyre pressure using a tyre pressure gauge in accordance with a given table | Summary sheet |
| 7 | carry out an oil check on a go-kart | Summary sheet |
| 8 | ensure that all pre-race safety checks are completed before racing a go-kart, ie a) tyre pressures/condition b) wheel nuts tightened c) brakes tested d) steering tested | Summary sheet |
| 9 | check and adjust the seating position | Summary sheet |
| 10 | carry out basic kart maintenance and safety checks in accordance with given checklist | Summary sheet |
| 11 | drive a go-kart around a track in a safe and competent manner, observing race rules | Summary sheet |
shown knowledge of | ||
| 12 | at least three working parts of a go-kart | Summary sheet |
| 13 | the purpose of at least three tools used to carry out basic go-kart maintenance | Summary sheet |
experienced | ||
| 14 | working as part of a team | Summary sheet |
| 15 | taking part in a visit to a go-kart track. | Summary sheet |
All outcomes recorded on an AQA Summary Sheet
Approved 31 May 2017Level - Level Two